Nonparametric bounds for the average causal effect: bpbounds examples

Introduction

This short vignette demonstrates the use of the bpbounds package. This is a R implementation of the of the nonparametric bounds for the average causal effect of Balke and Pearl (1997) and some extensions. Currently this R package is a port of our bpbounds Stata package (Palmer et al. (2011)). The code implements the approach of calculating the bounds outlined by Ramsahai (2007), Ramsahai (2008), and Ramsahai (2012).

We start by loading our package and the others needed for the code in this vignette.

library(bpbounds)
library(dplyr)
#> 
#> Attaching package: 'dplyr'
#> The following objects are masked from 'package:stats':
#> 
#>     filter, lag
#> The following objects are masked from 'package:base':
#> 
#>     intersect, setdiff, setequal, union
library(tidyr)

Features of the bpbounds package

Currently the package has one function, bpbounds(), which can accommodate the four scenarios implemented in our Stata command. These are to calculate the bounds for a binary outcome, a binary treatment/phenotype, and:

• a binary instrumental variable;
• a 3 category instrumental variable, e.g. a genotype in Mendelian randomization;

Bounds for these scenarios can be calculated with either

• trivariate data (in which all three variables are measured in one dataset);
• or bivariate data (in which the treatment/phenotype and instrument are measured in one dataset and the outcome and instrument are measured in another sample).

Vitamin A supplementation example

This example is taken from Table 1 of Balke and Pearl (1997). It is from a study of Vitamin A supplementation consisting of children in 450 villages. Of these, 221 villages were assigned to control and 229 to the treatment. The outcome was mortality.

First we setup a data.frame of cell counts and convert this into a table. Here we follow the notation that x is the received treatment, y is the outcome, and z is the randomized treatment (the instrumental variable).

tab1dat <- data.frame(
  z = c(0, 0, 1, 1, 1, 1, 0, 0),
  x = c(0, 0, 0, 0, 1, 1, 1, 1),
  y = c(0, 1, 0, 1, 0, 1, 0, 1),
  freq = c(74, 11514, 34, 2385, 12, 9663, 0, 0)
)

tab1inddat <- uncount(tab1dat, freq)
xt         <- xtabs(~ x + y + z, data = tab1inddat)
xt
#> , , z = 0
#> 
#>    y
#> x       0     1
#>   0    74 11514
#>   1     0     0
#> 
#> , , z = 1
#> 
#>    y
#> x       0     1
#>   0    34  2385
#>   1    12  9663

Next we use prop.table() to calculate the conditional probabilities, P(Y, X|Z), and then run bpbounds() assuming the data is trivariate. Although we could call bpbounds() using the table of cell counts xt directly, i.e. bpbounds(xt).

p <- prop.table(xt, margin = 3)
p
#> , , z = 0
#> 
#>    y
#> x              0            1
#>   0 0.0063859165 0.9936140835
#>   1 0.0000000000 0.0000000000
#> 
#> , , z = 1
#> 
#>    y
#> x              0            1
#>   0 0.0028113114 0.1972052257
#>   1 0.0009922276 0.7989912353

bpres <- bpbounds(p)
sbp   <- summary(bpres)
print(sbp)
#> 
#> Data:                    trivariate
#> Instrument categories:   2
#> 
#> Instrumental inequality: TRUE 
#>  Causal parameter Lower bound Upper bound
#>               ACE  -0.1946228 0.005393689
#>      P(Y|do(X=0))   0.9936141 0.993614084
#>      P(Y|do(X=1))   0.7989912 0.999007772
#>               CRR   0.8041263 1.005428354
#> 
#> Monotonicity inequality: TRUE 
#>  Causal parameter Lower bound Upper bound
#>               ACE  -0.1946228 0.005393689
#>      P(Y|do(X=0))   0.9936141 0.993614084
#>      P(Y|do(X=1))   0.7989912 0.999007772
#>               CRR   0.8041263 1.005428354

Therefore, the average causal effect is bounded between -0.1946 and 0.0054. The estimate of the ACE is found as $$\text{ACE} = \frac{\text{cov}(Y,Z)}{\text{cov}(X,Z)}$$ as follows.

covyz <- cov(tab1inddat$y, tab1inddat$z)
covxz <- cov(tab1inddat$x, tab1inddat$z)
ace   <- covyz / covxz
ace
#> [1] 0.003228039

condprob <- c(.0064, 0, .9936, 0, .0028, .001, .1972, .799)
tabp <- array(condprob,
              dim = c(2, 2, 2),
              dimnames = list(
                x = c(0, 1),
                y = c(0, 1),
                z = c(0, 1)
              )) %>%
  as.table()
bpbounds(tabp)
#> 
#> Data:                    trivariate
#> Instrument categories:   2
#> 
#> Instrumental inequality: TRUE 
#>  Causal parameter Lower bound Upper bound
#>               ACE  -0.1946000    0.005400
#>      P(Y|do(X=0))   0.9936000    0.993600
#>      P(Y|do(X=1))   0.7990000    0.999000
#>               CRR   0.8041465    1.005435
#> 
#> Monotonicity inequality: TRUE 
#>  Causal parameter Lower bound Upper bound
#>               ACE  -0.1946000    0.005400
#>      P(Y|do(X=0))   0.9936000    0.993600
#>      P(Y|do(X=1))   0.7990000    0.999000
#>               CRR   0.8041465    1.005435

gtab <- xtabs(~ y + z, data = tab1inddat)
gp   <- prop.table(gtab, margin = 2)
gp
#>    z
#> y             0           1
#>   0 0.006385916 0.003803539
#>   1 0.993614084 0.996196461

ttab <- xtabs(~ x + z, data = tab1inddat)
tp   <- prop.table(ttab, margin = 2)
tp
#>    z
#> x           0         1
#>   0 1.0000000 0.2000165
#>   1 0.0000000 0.7999835

bpres2 <- bpbounds(p = gp, t = tp, fmt = "bivariate")
sbp2   <- summary(bpres2)
print(sbp2)
#> 
#> Data:                    bivariate
#> Instrument categories:   2
#> 
#> Instrumental inequality: TRUE 
#>  Causal parameter Lower bound Upper bound
#>               ACE  -0.1974342 0.006385916
#>      P(Y|do(X=0))   0.9936141 0.993614084
#>      P(Y|do(X=1))   0.7961799 1.196212998
#>               CRR   0.8012969 1.203901009
#> 
#> Monotonicity inequality: TRUE 
#>  Causal parameter Lower bound Upper bound
#>               ACE  -0.1974342 0.006385916
#>      P(Y|do(X=0))   0.9936141 0.993614084
#>      P(Y|do(X=1))   0.7961799 1.002582378
#>               CRR   0.8012969 1.009025933

Mendelian randomization example

Mendelian randomization is an approach in epidemiology due to Davey Smith and Ebrahim (2003) in which genotypes established to be robustly associated with phenotypes are used as instrumental variables in order to better estimate the causal effect of the phenotype on a disease outcome.

This example uses data from Meleady et al. (2003). It is trivariate data with 3 category instrument and binary phenotype and outcomes. The instrument is the 677CT polymorphism (rs1801133) in the Methylenetetrahydrofolate Reductase gene, involved in folate metabolism, as an instrumental variable to investigate the effect of homocysteine on cardiovascular disease.

The data are presented to us as conditional probabilities, so we take care to enter them in the correct position in the vectors.

mt3 <- c(.83, .05, .11, .01, .88, .06, .05, .01, .72, .05, .20, .03)
p3 <- array(mt3,
            dim = c(2, 2, 3),
            dimnames = list(
              x = c(0, 1),
              y = c(0, 1),
              z = c(0, 1, 2)
            ))
p3     <- as.table(p3)
bpres3 <- bpbounds(p3)
sbp3   <- summary(bpres3)
print(sbp3)
#> 
#> Data:                    trivariate
#> Instrument categories:   3
#> 
#> Instrumental inequality: TRUE 
#>  Causal parameter Lower bound Upper bound
#>               ACE       -0.09     0.74000
#>      P(Y|do(X=0))        0.06     0.12000
#>      P(Y|do(X=1))        0.03     0.80000
#>               CRR        0.25    13.33333
#> 
#> Monotonicity inequality: FALSE

We see that in this example the monotonicity inequality is not satisfied.

Simulated example that does not satisy the IV conditions

This example recreates that found in section 8.3 of our Stata Journal paper which uses simulated data to show that the IV inequality does not always detect violations to the underlying model assumptions. We simulate two outcomes, y1 and y2, for which the assumptions are violated because there is a direct effect of the instrument, z, on the outcome. However, the direct effect on y2 is much smaller in magnitude than the direct effect on y1.

set.seed(2232011)
n      <- 10000
z      <- rbinom(n, 1, .5)
u      <- rbinom(n, 1, .5)
px     <- .05 + .1 * z + .1 * u
x      <- rbinom(n, 1, px)
p1     <- .1 + .2 * z + .05 * x + .1 * u
y1     <- rbinom(n, 1, p1)
p2     <- .1 + .05 * z + .05 * x + .1 * u
y2     <- rbinom(n, 1, p2)

tab1   <- xtabs(~ x + y1 + z)
p1     <- prop.table(tab1, margin = 3)

bpres1 <- bpbounds(p1)
sbp1   <- summary(bpres1)
print(sbp1)
#> 
#> Data:                    trivariate
#> Instrument categories:   2
#> 
#> Instrumental inequality: FALSE 
#> 
#> Monotonicity inequality: FALSE

Due to the strong direct effect of the instrument on the outcome, both the instrumental variable and monotonicity inequalities are not satisifed.

tab2   <- xtabs(~ x + y2 + z)
p2     <- prop.table(tab2, margin = 3)

bpres2 <- bpbounds(p2)
sbp2   <- summary(bpres2)
print(sbp2)
#> 
#> Data:                    trivariate
#> Instrument categories:   2
#> 
#> Instrumental inequality: TRUE 
#>  Causal parameter Lower bound Upper bound
#>               ACE -0.18711965   0.6700688
#>      P(Y|do(X=0))  0.17159525   0.2384172
#>      P(Y|do(X=1))  0.05129753   0.8416640
#>               CRR  0.21515868   4.9049378
#> 
#> Monotonicity inequality: FALSE

However, with the weaker direct effect we see that both are satisfied when the true underlying data generating model does not satisfy the instrumental variable assumptions.

Conclusion

In conclusion, we have demonstrated the use of our bpbounds package implementing nonparametric bounds for the average causal effect for a range of data scenarios.